Produktbeskrivning

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2 wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.

 

Viktiga egenskaper

APC NetShelter Rack PDU Advanced, Metered, 3Phase, 43.5kW 400V 63A or 34.6kW 415V 60A, 42 Outlets, IEC309. PDU types: Switched, Rack capacity: 0U, Type: Single-phase. AC outlets quantity: 48 AC outlet(s), AC outlet types: C13 coupler, C15 coupler, C19 coupler, C21 coupler, Power plug: IEC 60309. Nominal input voltage: 415 V, Maximum current: 60 A, AC input frequency: 50 - 60 Hz. Certification: CSA C22.2 No 62368-1, FCC part 15 subpart B, UL 62368-1. Width: 56 mm, Depth: 75 mm, Height: 1826 mm

 

Teknisk specifikation

PDU types	Switched
Type	Single-phase
Rack capacity	0U
Mounting	Vertical
Product colour	Black
Display	LCD
On/off switch	No

AC outlets quantity	48 AC outlet(s)
Power plug	IEC 60309
AC outlet types	C13 coupler,C15 coupler,C19 coupler,C21 coupler

Daisy chain	Yes
Certification	CSA C22.2 No 62368-1, FCC part 15 subpart B, UL 62368-1

Nominal input voltage	415 V
AC input frequency	50 - 60 Hz
Maximum current	60 A
Nominal output voltage	240 V
Output voltage	240 V
Load capacity	34600 VA
Maximum input current per phase	60 A
Maximum total current draw per phase	48 A

Width	56 mm
Depth	75 mm
Height	1826 mm
Weight	11700 g

Package weight	14700 g
Package width	262 mm
Package depth	132 mm
Package height	1980 mm

Operating temperature (T-T)	-5 - 60 °C
Storage temperature (T-T)	-25 - 65 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 95 %
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 15240 m

Total carbon footprint (kg of CO2e)	21687.02